 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CM1407 4 and 8 Channel EMI Filter Arrays with ESD Protection Features * * * * * * * Four and eight channels of EMI filtering with ESD protection Greater than 25dB of attenuation from 800MHz to 3GHz 15kV ESD protection (IEC 61000-4-2, contact discharge) 30kV ESD protection (MIL-STD-883, Method 3015, HBM) Fabricated with CenturionTM advanced low capacitance zener process technology Space saving, low profile 8 and 16-lead TDFN packages Lead-free version available Product Description California Micro Devices's CM1407 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1407 has component values of 7.5pF-200-7.5pF. The parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of 15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than 30kV. This device is particularly well-suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package and easy-to-use pin assignments. In particular, the CM1407 is ideal for EMI filtering and protecting data lines from ESD in wireless handsets. The CM1407 is available in space-saving, low-profile, 8 and 16-lead TDFN packages. It is fabricated with California Micro Devices' CenturionTM process and available with optional lead-free finishing. Applications * * * I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. EMI filtering for LCD, camera and chip-to-chip data lines Electrical Schematic 200 FILTERn* 7.5pF 7.5pF FILTERn* GND 1 of 4/8 EMI Filtering + ESD Channels * See Package/Pinout Diagram for expanded pin information. (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 1 CM1407 PACKAGE / PINOUT DIAGRAMS (Pins Down View) 8765 1 234 TOP VIEW BOTTOM VIEW (Pins Up View) CM1407-04DE/DF 8-Lead TDFN Package Pin 1 Marking N07 4x 8 GND PAD 765 1234 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 CM1407-08DE/DF 16-Lead TDFN Package Pin 1 Marking 1 2 3 N78x 4 5 6 7 8 GND PAD 16 15 14 13 12 11 10 9 Notes: 1) This drawing is not to scale. 2) See Ordering Information section below for device specific marking. PIN DESCRIPTIONS Pins CM1407 CM1407 -04Dx -08Dx 1 2 3 4 1 2 3 4 5 6 7 8 GND Pad NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 GND DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Device Ground Pins CM1407 CM1407 -04Dx -08Dx 8 7 6 5 16 15 14 13 12 11 10 9 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Ordering Information PART NUMBERING INFORMATION Standard Finish Leads/Pins 8 16 Package TDFN-08 TDFN-16 Ordering Part Number1 CM1407-04DF CM1407-08DF Part Marking N07 4F N78F Lead-free Finish Ordering Part Number1 CM1407-04DE CM1407-08DE Part Marking N07 4E N78E Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. (c) 2005 California Micro Devices Corp. All rights reserved. 2 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 CM1407 Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power Rating per Resistor Package DC Power Rating RATING -65 to +150 100 300 UNITS C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL R C VDIODE ILEAK VSIG PARAMETER Resistance Capacitance Diode Standoff Voltage Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Cut-off Frequency ZSOURCE=50, ZLOAD=50 At 2.5V DC, 1MHz, 30mV AC IDIODE = 10A VDIODE = 3.3V ILOAD = 10mA ILOAD = -10mA Notes 2 and 3 30 15 R = 200, C = 15pF; Note 3 kV kV 5.6 -1.5 CONDITIONS MIN 160 6 TYP 200 7.5 6.0 0.1 6.8 -0.8 1 9.0 -0.4 MAX 240 9 UNITS pF V A V V VESD fC 210 MHz Note 1: TA=25C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: These parameters are guaranteed by design and characterization. (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 3 CM1407 Performance Information Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 1. Channel 1 EMI Filter Performance (CM1407-04) Figure 2. Channel 2 EMI Filter Performance (CM1407-04) (c) 2005 California Micro Devices Corp. All rights reserved. 4 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 CM1407 Performance Information (cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 3. Channel 3 EMI Filter Performance (CM1407-04) Figure 4. Channel 4 EMI Filter Performance (CM1407-04) (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 5 CM1407 Performance Information (cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 5. Channel 1 EMI Filter Performance (CM1407-08) Figure 6. Channel 2 EMI Filter Performance (CM1407-08) (c) 2005 California Micro Devices Corp. All rights reserved. 6 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 CM1407 Performance Information (cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 7. Channel 3 EMI Filter Performance (CM1407-08) Figure 8. Channel 4 EMI Filter Performance (CM1407-08) (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 7 CM1407 Performance Information (cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 9. Channel 5 EMI Filter Performance (CM1407-08) Figure 10. Channel 6 EMI Filter Performance (CM1407-08) (c) 2005 California Micro Devices Corp. All rights reserved. 8 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 CM1407 Performance Information (cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 11. Channel 7 EMI Filter Performance (CM1407-08) Figure 12. Channel 8 EMI Filter Performance (CM1407-08) (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 9 CM1407 Performance Information (cont'd) Figure 13. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25C) (c) 2005 California Micro Devices Corp. All rights reserved. 10 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 CM1407 Mechanical Details TDFN-08 Mechanical Specifications Dimensions for the CM1407 device packaged in an 8lead TDFN package are presented below. For complete information on the TDFN-08, see the California Micro Devices TDFN Package Information document. Mechanical Package Diagrams D 8765 PACKAGE DIMENSIONS Package JEDEC No. Leads Dim. A A1 A2 A3 b D D2 E E2 e K L R r1 # per tube # per tape and reel 0.20 0.20 0.30 0.075 0.075 NA 3000 pieces 0.45 0.46 0.88 0.18 Millimeters Min 0.80 0.00 0.55 Nom 0.90 0.02 0.65 0.20 0.25 2.00 0.98 2.00 0.56 0.50 0.008 0.008 0.012 0.003 0.003 0.018 0.66 0.018 1.08 0.035 0.30 0.007 Max 1.00 0.05 0.80 Min 0.031 0.000 0.022 TDFN MO-229 (Var. VCCD-3) 8 Inches Nom 0.035 0.001 0.026 0.008 0.010 0.079 0.039 0.079 0.022 0.020 0.026 0.043 0.012 0.08 C E Pin 1 Marking Max 0.039 0.002 0.031 0.10 C 1234 TOP VIEW A1 SIDE VIEW A A3 A2 1234 D2 r1 GND PAD R L E2 Controlling dimension: millimeters This package is compliant with JEDEC standard MO-229, variation VCCD-3 with exception of the "D2" and "E2" dimensions as called out in the table above and the "r1" dimension which is not specified in the MO-229 standard. K e 8765 b 8X BOTTOM VIEW 0.10 M CAB Package Dimensions for 8-Lead TDFN (c) 2005 California Micro Devices Corp. All rights reserved. 08/03/05 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 11 CM1407 Mechanical Details (cont'd) TDFN-16 Mechanical Specifications Dimensions for the CM1407 supplied in a 16-lead TDFN package are presented below. For complete information on the TDFN-16, see the California Micro Devices TDFN Package Information document. Mechanical Package Diagrams D 16 15 14 13 12 11 10 9 Pin 1 Marking PACKAGE DIMENSIONS Package JEDEC No. Leads Dim. A A1 A2 A3 b D D2 E E2 e K L # per tube # per tape and reel 0.10 0.20 0.20 3.90 3.10 1.50 0.30 Millimeters Min 0.70 0.00 0.45 Nom 0.75 0.02 0.55 0.20 0.25 4.00 3.20 1.60 0.40 0.50 0.30 0.30 0.50 0.40 0.004 0.008 NA 0.30 4.10 3.30 1.70 0.50 0.008 0.154 0.122 0.059 0.012 Max 0.80 0.05 0.65 Min 0.028 0.000 0.018 TDFN MO-229C 16 Inches Nom 0.030 0.001 0.022 0.008 0.010 0.157 0.126 0.063 0.016 0.020 0.012 0.012 0.020 0.016 0.012 0.161 0.130 0.067 0.020 Max 0.031 0.002 0.026 0.08 C E 12345678 TOP VIEW 0.10 C A1 SIDE VIEW A A3 A2 8X e 0.10 M CAB b Pin 1 Locator 1 2 3 C0.2 4 5 6 7 8 E2 GND PAD 9 K 16 15 14 13 12 11 10 D2 L BOTTOM VIEW 3000 pieces Controlling dimension: millimeters This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Package Dimensions for 16-Lead TDFN (c) 2005 California Micro Devices Corp. All rights reserved. 12 490 N. McCarthy Blvd., Milpitas, CA 95035-5112 Tel: 408.263.3214 Fax: 408.263.7846 www.calmicro.com 08/03/05 |
Price & Availability of CM1407-08DF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |